6AG1214-1BG31-2XB0

6AG1214-1BG31-2XB0
Merk: Siemens
Model: 275158041
Beschikbaarheid: C - Geen voorraad artikel
Prijs: €642,00
incl. BTW €776,82
Aantal:     - of toevoegen aan -   Verlanglijst
Offerte aanvragen voor dit productVraag een offerte aan

Overview

  • The compact high-performance CPU
  • With 24 integrated I/Os
  • Expandable with:
    • 1 signal board (SB) or communication board (CB); not possible with: 6AG1214-1AG31-2XB0, 6AG1214-1BG31-2XB0, 6AG1214-1HG31-2XB0
    • 8 signal modules (SM)
    • Max. 3 communication modules (CM)
Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

Design

The compact CPU 1214C has:

  • 3 device versions with different power supply and control voltages
  • Integrated power supply either as wide-range AC or DC power supply (85 to 264 V AC or 24 V DC)
  • Integrated 24 V encoder/load current supply:
    For direct connection of sensors and encoders. With 400 mA, the output current can also be used as load power supply
  • 14 integrated digital inputs 24 V DC (current sinking/current sourcing (IEC type 1 current sinking))
  • 10 integrated digital outputs, either 24 V DC or relay
  • 2 integrated analog inputs 0 to 10 V
  • 2 pulse outputs (PTO) with a frequency of up to 100 kHz
  • Pulse-width modulated outputs (PWM) with a frequency of up to 100 kHz
  • Integrated Ethernet interface (TCP/IP native, ISO-on-TCP)
  • 6 fast counters (3 with max. 100 kHz; 3 with max. 30 kHz), with parameterizable enable and reset inputs, can be used simultaneously as up and down counters with 2 separate inputs or for connecting incremental encoders
  • Expansion by additional communication interfaces, e.g. RS485 or RS232
  • Expansion by analog or digital signals directly on the CPU via signal board (with retention of CPU mounting dimensions)
  • Expansion by a wide range of analog and digital input and output signals via signal modules
  • Optional memory expansion (SIMATIC Memory Card)
  • PID controller with auto-tuning functionality
  • Integral real-time clock
  • Interrupt inputs:
    For extremely fast response to rising or falling edges of process signals
  • Removable terminals on all modules
  • Simulator (optional):
    For simulating the integrated inputs and for testing the user program

Function

  • Comprehensive instruction set:
    A wide range of operations facilitates programming:
    • Basic operations such as binary logic operations, result allocation, save, count, create times, load, transfer, compare, shift, rotate, create complement, call subprogram (with local variables)
    • Integral communication commands (e.g. USS protocol, Modbus RTU, S7 communication "T-Send/T-Receive" or Freeport)
    • User-friendly functions such as pulse-width modulation, pulse sequence function, arithmetic functions, floating point arithmetic, PID closed-loop control, jump functions, loop functions and code conversions
    • Mathematical functions, e.g. SIN, COS, TAN, LN, EXP
  • Counting:
    User-friendly counting functions in conjunction with the integrated counters and special commands for high-speed counters open up new application areas for the user.
  • Interrupt processing:
    • Edge-triggered interrupts (activated by rising or falling edges of process signals on interrupt inputs) support a rapid response to process events.
    • Time-triggered interrupts.
    • Counter interrupts can be triggered when a setpoint is reached or when the direction of counting changes.
    • Communication interrupts allow the rapid and easy exchange of information with peripheral devices such as printers or bar code readers.
  • Password protection
  • Test and diagnostics functions:
    Easy-to-use functions support testing and diagnostics, e.g. online/offline diagnostics.
  • "Forcing" of inputs and outputs during testing and diagnostics:
    Inputs and outputs can be set independently of cycle and thus permanently, for example, to test the user program.
  • Motion Control in accordance with PLCopen for simple movements.
  • Library functionality

Programming

The STEP 7 Basic programming package permits complete programming of all S7-1200 controllers and the associated I/O.

Attachments
Datasheet Datasheet
Engineeringshop © 2018 | gemaakt door Project23 | Ontwerp door Bootspat BV Spetterende Media